Arcam Trade-in offer
It's the perfect time to upgrade your home music system, and with this superb offer you can save pounds on some fantastic Arcam audio products! Just check out the details below...
SA10
In any amplifier, the signal path is at the mercy of anything that creates noise within the unit. Thus, Arcam spare no expense in using only the most high-quality components, even if it means the cost of their power supplies overtaking that of everything else.
The result, of course, is worth every penny.
A singer’s sharp intake of breath before hitting the chorus, a guitarist’s fingers sliding against the strings – it’s those seemingly minor details that can bring music to life.
Arcam SA10
Extremely efficient class A/B amplification
50W of power per channel
5 analogue inputs including phono
3 digital inputs
32-bit DAC,Sabre ESS9016K2M
Full I/P control
Total harmonic distortion + noise = 0.003%
Simply trade-in any audio product (working of broken) and save £200 on a brand-new Arcam SA10 amplifier!
Normal price £699
Price after trade-in £499.
SA20
There are two frequent problems with hi-fi amplifiers. Class A, the traditional audiophile’s choice, uses a single power supply constantly running at full capacity, even when there’s no signal coming through. Great for reproducing those subtle details at low levels however struggles to provide extreme power when needed.
Class A/B, the most common amp class, switches between the two internal amplifiers, one for each half of the waveform. Far more efficient but often a recipe for crossover distortion, since those low-level details we crave can get lost within any mis-match between the two switching over.
Class G is essentially a hybrid amplifier, utilising Class A specifically for low-level signals, but when required switching in an additional power supply to power those larger sections of the waveform.
Arcam SA20
Class G amplification for impeccable sound and efficiency
90W of power per channel
5 analogue inputs including phono
3 digital inputs
32-bit DAC,Sabre ESS9038K2M
Full I/P control
Total harmonic distortion + noise = 0.003%
Simply trade-in any audio product (working of broken) to save £200 on a brand-new Arcam SA20 amplifier!
Normal price £999
Price after trade-in £799
SA10
In any amplifier, the signal path is at the mercy of anything that creates noise within the unit. Thus, Arcam spare no expense in using only the most high-quality components, even if it means the cost of their power supplies overtaking that of everything else.
The result, of course, is worth every penny.
A singer’s sharp intake of breath before hitting the chorus, a guitarist’s fingers sliding against the strings – it’s those seemingly minor details that can bring music to life.
CDS50
The design of the HDA range draws upon all of Arcam’s experience as one of the UK’s most respected audio companies, to produce Arcam’s best performing range of audio products yet – using the best quality components and engineering practices, the HDA range is designed and built to give you years of listening enjoyment. You’re guaranteed the full aural picture of whatever the artist intended. Take a look at the spec, this is more than a simple CD player...
Arcam SA10
Extremely efficient class A/B amplification
50W of power per channel
5 analogue inputs including phono
3 digital inputs
32-bit DAC,Sabre ESS9016K2M
Full I/P control
Total harmonic distortion + noise = 0.003%
CDS50
Plays all disc formats, including SACD, CD-A, CD-R and CD-RW
Supports audio file formats including FLAC, WAV, AIFF, OGG, MP3, AAC and WMA
USB input
Superb 32-bit DAC built in
Streaming through the music life app
Total harmonic distortion + noise = 0.002%
Simply trade in any audio product (working of broken) and save £399 on a brand-new SA10/CDS50 Arcam audio system!
Normal price £1398
Price after trade-in £999
SA20
There are two frequent problems with hi-fi amplifiers. Class A, the traditional audiophile’s choice, uses a single power supply constantly running at full capacity, even when there’s no signal coming through. Great for reproducing those subtle details at low levels however struggles to provide extreme power when needed.
Class A/B, the most common amp class, switches between the two internal amplifiers, one for each half of the waveform. Far more efficient but often a recipe for crossover distortion, since those low-level details we crave can get lost within any mis-match between the two switching over.
Class G is essentially a hybrid amplifier, utilising Class A specifically for low-level signals, but when required switching in an additional power supply to power those larger sections of the waveform.
CDS50
The design of the HDA range draws upon all of Arcam’s experience as one of the UK’s most respected audio companies, to produce Arcam’s best performing range of audio products yet – using the best quality components and engineering practices, the HDA range is designed and built to give you years of listening enjoyment. You’re guaranteed the full aural picture of whatever the artist intended. Take a look at the spec, this is more than a simple CD player...
Arcam SA20
Class G amplification for impeccable sound and efficiency
90W of power per channel
5 analogue inputs including phono
3 digital inputs
32-bit DAC,Sabre ESS9038K2M
Full I/P control
Total harmonic distortion + noise = 0.003%
CDS50
Plays all disc formats, including SACD, CD-A, CD-R and CD-RW
Supports audio file formats including FLAC, WAV, AIFF, OGG, MP3, AAC and WMA
USB input
Superb 32-bit DAC built in
Streaming through the music life app
Total harmonic distortion + noise = 0.002%
Simply trade in any audio product (working of broken) and save £399 on a brand-new SA20/CDS50 Arcam audio system!
Normal price £1698
Price after trade-in £1299
Arcam Trade-in Offer runs until January 31st 2020. For further information please feel free to contact us on 01494 - 531682.